Fabtech 3" Lift Kit with Performance Rear Shocks – Fits 2022-25 Toyota Tundra 4WD (Rear Air Suspension)

Straight answers

• Fits: 2022-25 Toyota Tundra 4WD (Rear Air Suspension). Check the vehicle fitment below before you order.
• Drivetrain: 4WD only.
• Fitment notes: Rear Air Without Adaptive Variable Suspension.
• Front Lift Amount: 3 Inch.
• Rear Lift Amount: 3 Inch.
• Maximum Tire Size: 35 x 12.50.
• Front Lift Type: Strut Assembly Spacer.
• Rear Lift Type: Air Bag Spacer.
• Shock Type: Hydraulic.
• Wheel Backspacing: 5 in.
• Minimum Wheel Diameter: 18.
• Wheel Offset (mm): 0.
• Shocks: With Rear Performance Shock Absorbers - Front Shock Change Not Required.
• Color: Black Components/ White Shocks.

Not sure it fits your truck? Call (806) 621-1226 before you order and we'll check the fit for your year, make, model and drivetrain.

Fabtech's high quality Tundra lift kit offers increased height to run 33 Inch or 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using a spacer under the factory air bags for the additional ride height. The rear shocks are replaced with Fabtech Performance twin tube shocks for a good rear ride quality.

Features

• Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball
• Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel
• 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle
• Retains Stock Front Coilover Shocks For A Factory Ride
• Perfect System For The Daily Driver That Wants Increased Clearance To Run 33 Inch Or 35 Inch Tires
• Limited Lifetime Warranty

Specifications

• Brand: Fabtech
• Part Number: K7089
• Type: Lift Kit Suspension

Vehicle Fitment

• 2022-2025 Toyota Tundra – 4WD, Double Cab
  Note: Rear Air Without Adaptive Variable Suspension

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov